Many paths, driveways and concrete floors can be coated, which saves you a lot of time and money. Concrete resurfacing is a great way to revitalize old-looking concrete and make it fresh again. Essentially, the concrete coating consists of adding a decorative layer to your concrete. Yes, you can re-pave a concrete driveway, porch, patio and pool deck in the same way.
Repaving concrete is one way to make old concrete look new again. A concrete coating is applied over the existing surface, offering a variety of color, texture and pattern options. This type of decorative finish can be done on driveways, patios, pool terraces and even interior floors. Sometimes a concrete slab is too unstable or too damaged to make it possible to re-pave.
But when the problem is only surface cracking, discoloration or minor chipping or chipping, resurfacing is a very good option. It is a project that almost anyone can tackle, and it is much more affordable than replacing the concrete slab. Keep in mind, however, that resurfaced concrete probably won't last as long as a new concrete surface, especially outdoors in colder climates. If you want to repair damaged areas of your concrete surface, you need to start by preparing the area for repair.
Pour enough dry concrete mix into a 5 gallon bucket to repair any cracks and repair damaged areas. Sand mixture or concrete resurfacing, which does not contain gravel, can be used if the area to be repaired is not large or deep. A standard concrete mix containing gravel works best for patching large or deep areas. The dry powder is mixed with water to form a slurry, which is then spread over the concrete slab with a long-handled squeegee.
Fortunately, the new state-of-the-art polymer resin technology found in next-generation concrete resurfacers has set improved standards for bond strength, workability and working time. If you do the four things above, your concrete resurfacing repair should last a long time. The restoration of this indoor pool deck took only five days for Travis Winters, the owner of Nebraska Concrete Coatings. If you are completely resurfacing a concrete slab, be sure to use a re-paver designed for that purpose, such as the Sakrete Flo-Coat Concrete Respaver, Quickrete Concrete Repaver, or Quickrete Re-Cap Repaver, also from Quickrete.
I'll show you how to use self-leveling concrete to repair, coat and level the old concrete floor. In addition, the resurfacing process is less labor-intensive and less damaging than replacing concrete. Coating is a proven method of restoring the durability and appearance of poor concrete by applying a thin layer of ready-mixed polymer-modified fluid mortar over an existing surface. After the tiles were removed and the underlying concrete was prepared, a 1 1/2 inch layer of unbonded reinforced concrete was applied.
Whether you want to restore your exterior concrete or breathe new life into your home's interior with a decorative floor layer, start by looking at the photos to see what you like. There are a variety of decorative overlay options to cover concrete driveways, pool decks, patios, parking areas, and just about any other concrete surface. There are a variety of culprits that cause driveway, yard, sidewalks and other concrete surfaces to crack, chip and flake due to freeze-thaw cycles, vehicle traffic or daily wear and tear. Werline adds: “I also found that having some (respaver) bags on the truck can be useful with unexpected workplace concrete issues that need to be handled quickly.
This preparation involves pressure washing the slab, repairing major damage with a quality concrete patch product and removing any oil stains, paint or tree sap.