Regardless of whether you have new or old concrete, you don't have to worry about tearing it off completely. All you need to do is simply resurface it with a decorative concrete resurfacing system. That said, concrete resurfacing provides a different option than demolition. Permeable pavement can be installed over existing concrete driveways, and the only preparation needed is a little grinding on some edges and the installation of edges of aluminum strips.
A three-part resin is combined with the aggregate on site, before leveling and leveling with trowel over the existing driveway. Often, all work can be completed in one day, with the surface ready for vehicle traffic after 48 hours. Although concrete is a durable surface, concrete driveways deteriorate and develop cracks over the years. Instead of going through the expense of removing the slab and pouring a new one, you may be able to fill and coat existing concrete.
If you have a worn concrete driveway that needs life, a concrete coating can be used. This step is to create a uniform concrete surface. It offers concrete grinding to remove old coatings such as old paint. Old paint is a problem when it is re-paved, creating a barrier between the new product and the concrete, so it must disappear. We offer our customers to remove these coatings themselves or we can go in with our bucket grinder and vacuum. After the repair work is finished, it's time to apply a thin layer of resurfacing concrete all over the driveway.
Sand mixture or concrete resurfacing, which does not contain gravel, can be used if the area to be repaired is not large or deep. In the past, when a concrete yard or driveway began to show severe signs of aging, the only repair options were to use a jackhammer or bring in an excavator. In these cases, the surface layer loses its color and this exposes the concrete below. This includes plain or bare gray concrete, painted or sealed concrete, and stamped or patterned concrete. This home in Middleton Grange was looking for concrete driveway resurfacing contractors to renovate its faded and peeling driveway.
When people build a house, they usually receive concrete inputs as part of the contract to build the structure. This home in Eaglevale in the Campbelltown area of Sydney had its outdoor areas previously paved with stenciled concrete. The owner of this concrete driveway of Harrington Park in Sydney's Macarthur region was eager to re-pave it. Spray the cleaner onto the concrete surface with a low-pressure nozzle following the instructions on the container. Mix the resurfacing much thinner than the concrete that was used to repair the cracks, making it to the consistency of pancake dough.